no ADV Rider, secção "orange crush", há um tópico que começa com uma bela colectanea de informações/upgrades/resolução de problemas relacionados com as KTM 950/990 recolhidas em vários forums que voces laranjinhas devem conhecer
esta é apenas a a parte dedicada as falhas relacionadas com o descanço lateral...
Citar:
Sidestand Bypass:
Louge: Connect green and black wires together.
http://www.advrider.com/forums/showthread.php?t=127118
KOTH: On the other side of the connector you need to tie the brown and pink wires together
KOTH: BTW, this doesn't work with the 990's or the 950 SE and SM due to the use of a HAL effect device on these models. Either ground the pink wire to chassis ground or see below.
950 SE/SM and All 990's - Sidestand Bypass:
ABYSS: Install the Super Duke sidestand bypass PN 61011046044
cpmodem: Here's a another option for any 950/990, including the ADV, SE and SM.
Ground the green-black wire at the connector for the gear selector switch (#2 in the photo below). Down in front of the rotor cover on the left side of the engine). This will allow the ECU to provide ignition to the coils no matter what gear you are in, whether the kickstand is up or down, and clutch in or out. This will eliminate any possibility of one or more of the "safety" devices malfunctioning and killing the ignition. It will also allow the starter to work anytime the button is pushed And your green neutral light will stay on always. But, as I said this is not for "casual" use, but rather for emergency situations only. Like as a quick and easy way to bypass a failed safety device when one craps out in the boonies and you just wanna get home.
BTW, arrow #3 in the photo points to the sidestand switch connector where ABYSS's permanent fix is to be made.
Louge: Connect green and black wires together.
http://www.advrider.com/forums/showthread.php?t=127118
KOTH: On the other side of the connector you need to tie the brown and pink wires together
KOTH: BTW, this doesn't work with the 990's or the 950 SE and SM due to the use of a HAL effect device on these models. Either ground the pink wire to chassis ground or see below.
950 SE/SM and All 990's - Sidestand Bypass:
ABYSS: Install the Super Duke sidestand bypass PN 61011046044
cpmodem: Here's a another option for any 950/990, including the ADV, SE and SM.
Ground the green-black wire at the connector for the gear selector switch (#2 in the photo below). Down in front of the rotor cover on the left side of the engine). This will allow the ECU to provide ignition to the coils no matter what gear you are in, whether the kickstand is up or down, and clutch in or out. This will eliminate any possibility of one or more of the "safety" devices malfunctioning and killing the ignition. It will also allow the starter to work anytime the button is pushed And your green neutral light will stay on always. But, as I said this is not for "casual" use, but rather for emergency situations only. Like as a quick and easy way to bypass a failed safety device when one craps out in the boonies and you just wanna get home.
BTW, arrow #3 in the photo points to the sidestand switch connector where ABYSS's permanent fix is to be made.
link do tópico
http://www.advrider.com/forums/showthread.php?t=279787
Pedro... a melhor solução deve ser o bypass da SuperDuke
![[}:)]](./images/smilies/icon_smile_evil.gif "smilealot"){kind=icon}
![[wink]](./images/smilies/icon_smile_wink.gif "wink"){kind=icon}
